Legacy Beaded Tongue & Groove MDF Sample

The panels are available in several profiles and dimensions: 

Fluted, Reeded, Reeded Fine, SlatWall 

Full Panel: 2400mm (H) x 600mm (W) x 12mm (D) Half-Height: 1200mm (H) x 600mm (W) x 12mm (D) 

Beaded Tongue and Groove & V-Groove Tongue and Groove: 

Full Panel: 2400mm (H) x 600mm (W) x 9mm (D) Half-Height: 800mm (H) x 600mm (W) x 9mm (D) 

Apply Hybrid Grab Adhesive to the back of each panel and press firmly onto the wall. For seamless results, use wood filler on joints and sand before painting. If needed, pin the panels with 25mm pins to aid adhesion. View our fitting guide for more details.

We offer both pre-primed and unprimed panels to suit your project needs and DIY skill level. If you opt for unprimed panels, simply install them onto the wall, fill and caulk the seams, then apply a water-based primer until you achieve your desired coverage before painting. Pre-Primed panels are ready to paint.

You can use a brush, roller, or sprayer with your chosen paint colour and finish. For the best results, we recommend installing the panels first, sealing any gaps, and then painting. While pre-painting is possible, it may require touch-ups after installation and typically needs a large prep area.

Each panel covers 1.44m² (2400x600mm), 0.72m² (1200x600mm) or 0.48m²(800x600mm). Measure the height and width of your wall in metres, multiply these values together to calculate the total area, and divide by 1.44, 0.72, or 0.48 depending on panel size. Always round this up.

Panels are crafted from moisture-resistant MDF, which often has a green core. This core may be visible in machined profiles but does not affect surface quality or paint application.

Hidrofugo is a high-density, high-performance MDF with excellent moisture resistance, making it suitable for high-humidity areas like kitchens and bathrooms.

Panels made from Hidrofugo MDF are suitable for high-humidity areas but should not be exposed to direct water contact or excessive moisture.

Yes, Legacy MDF Panels made with Hidrofugo moisture-resistant MDF are suitable for high-humidity areas such as kitchens and bathrooms, but they should not be exposed to direct water contact or excessive moisture. Always ensure proper ventilation.

For straight cuts, use a fine-toothed hand saw for a clean edge. A jigsaw can be used for larger sections, guide it carefully to avoid chipping. For middle cuts, drill a starter hole, th.en use a hand saw or jigsaw. For precise cuts, a multi-tool with a blade attachment is ideal

Clean the panels with a soft brush nozzle on a vacuum or a damp cloth. Avoid abrasive cleaners and chemicals.

Yes, but ensure the wall is smooth and level. Secure the panels with screws through the wallpaper and into the wall. Conceal screw heads with wood filler.

Panels can be installed near, but not in direct contact with, heat sources. Maintain at least 45cm of clearance and use extra adhesive for secure bonding.

Yes, but use both Hybrid Grab Adhesive and screws for secure installation. Screw through the panels into ceiling joists, then conceal screw heads with filler, then prime and paint for a seamless look.